Publikationen

2024

Paulus, P., Ruppert, Y., Vielhaber, M., Griebsch, J.
Influence of heat treatments on the mechanical properties and microstructure of VDM Alloy 780 components manufactured by laser metal deposition
in: Journal of Laser Application, 2024, Vol. 36 (4), 042016  >>>Link

Paulus, P., Ruppert, Y., Andreicovici, A., Vielhaber, M., Griebsch, J.
Comparison of machine learning based methods on prediction quality of thin-walled geometries using laser-based Direct Energy Deposition
in: 13th CIRP Conference on Photonic Technologies [LANE 2024], 15-19 September 2024, Fürth, Germany, Procedia CIRP Vol. 124, Seiten 781–784  >>>Link

König, K., Vielhaber, M., 
Incorporating Lightweight Design and Design for Sustainability in Product Development–A Meta-Synthesis Based on a Systematic Literature Review
Proceedings of NordDesign 2024, Reykjavík, Iceland, Seiten 751-760

König, K., Vielhaber, M. ,
Rethinking customer satisfaction towards more sustainable products – Sufficiency within the extended Kano Model
Proceedings of NordDesign 2024, Reykjavík, Iceland, Seiten 790-800

Mohnke, J., Mörsdorf, S., Vielhaber, M.,
X-PEC – A Problem Expanding and Creativity Framework for Generating Effective Ideas to Improve Sustainability in the Early Stages of Product Development
Proceedings of NordDesign 2024, Reykjavík, Iceland, Seiten 683-692  >>>Link

Mathieu, J., Vielhaber, M.,
A Framework for the selection of AI-based methods to support the development of passive vehicle safety systems
Proceedings of NordDesign 2024, Reykjavík, Iceland, Seiten 313-322  >>>Link

Fleischer, J., Scholz, J., Zeidler, S., Herrmann, H.-G., Quirin, S. Vielhaber, M., König, K., Mathieu, J., Kleiner, S., Mai, K., Kneidl, B., Betancourt, M., Arnold, T., Runge, M., Gwosdek, M., Müller, A., Auch, L., Mattern, T., Bechteler, K., Kroll-Orywahl, O., Glindemann, H., Schuh, A., Boldt, N., Wenzel, W.
Handlungsleitfaden zur systemischen Entwicklung und der gezielten Hebung von Leichtbaupotenzialen
Projektergebnis des BMWK-Projekts SyProLei, Institut für Produktionstechnik (WBK), Karlsruhe, 01.08.2024  >>>Link

Mathieu, J., Gupta, P., Di Roberto, M., Vielhaber, M.
Minimizing occupant loads in vehicle crashes through reinforcement learning-based restraint system design: assessing performance and transferability
in: Proceedings of the Design Society, Vol. 4, 18th International Design 2024, Cavtat-Dubrovnik, May 2024, Seiten 2139-2148 >>>Link

König, K., Vielhaber, M.
Analysis of the Interrelationships between Lightweight Design and Design for Sustainability
in: 31st CIRP Conference on Life Cycle Engineering, June 19-21, 2024, Torino, Italy, Procedia CIRP, Vol. 122, Seiten 324-329 >>>Link

König, K., Mathieu, J., Vielhaber, M.
A Sustainability-Driven Comparison of Methods for the Identification of Lightweight Design Potentials in Product Generation Engineering
in: 31st CIRP Conference on Life Cycle Engineering, June 19-21, 2024, Torino, Italy, Procedia CIRP, Vol. 122, Seiten 145-150 >>>Link

König, K., Mathieu, J., Vielhaber, M.
Resource conservation by means of lightweight design and design for circularity – A concept for decision making in the early phase of product develepment
in: Resources, Conservation and Recycling, 2024, Vol. 201, February, 107331 >>>Link

2023

Paulus, P., Ruppert, Y., Vielhaber, M., Griebsch, J.
Prediction of single track clad quality in laser metal deposition using dissimilar materials: Comparison of machine learning-based approaches
in: Journal of Laser Applications, 2023, 35 (4), 042034  >>>Link

Mathieu, J., Di Roberto, M., Vielhaber, M.
A data-driven methodology for the analysis and explanation of system behavior in crash simulations
in: 14th LS-DYNA Users-Conference, Baden-Baden, Germany, October 2023 >>> Link

Häfele, T., Schneberger, J.-H., Buchholz, S.; Vielhaber, M., Griebsch, J.
The impact of geometric complexity on manufacturing process efficiency of Selective Laser Sintering
in: 56th CIRP International Conference on Manufacturing Systems, Procedia CIRP, Vol. 120, 2023, Stellenbosch, South Africa, Seiten 968-973 >>>Link

Schweitzer, G., Bitzer, M.; Vielhaber, M.,
Engineering Graph as an Approach to Support Design Decisions in Product Development
in: Proceedings of the International Conference on Engineering Design (ICED23), Bordeaux, France, 24-28 July 2023, Seiten 1625-1634 >>>Link

Scholz, J., Kaspar, J., König, K., Friedmann, M., Vielhaber, M., Fleischer, J.
Lightweight design of a gripping system using a holistic systematic development process – A case study
in: 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering, Procedia CIRP, Vol. 118, 2023, Seiten 187-192 >>>Link

König, K., Zeidler, S., Walter, R., Friedmann, M., Fleischer, J., Vielhaber, M.
Lightweight creativity methods for idea generation and evaluation in the conceptual phase of lightweight and sustainable design
in: Grand Challenges for Engineering Design, 17-19 May 2023, Sydney, Australia, Procedia CIRP Design Conference, Vol.119, 2023, Seiten 1170-1175 >>>Link

König, K., Kaspar, J., Vielhaber, M.
Sustainable Systemic Lightweight Design (S2LWD) – Guidance for the heuristic application of lightweight design within an integrated product development process
in: Grand Challenges for Engineering Design, 17-19 May 2023, Sydney, Australia, Procedia CIRP Design Conference, Vol.119, 2023, Seiten 333–338 >>>Link

Mörsdorf, S., Vielhaber, M.
Positive Impact Product Engineering (PIPE) Model – The way to net-positive sustainable products
in: 30th CIRP Conference on Life Cycle Engineering, May 15-17, 2023, New Brunswick, NJ, USA, Procedia CIRP, Vol. 116, 2023, Seiten 474-479 >>>Link

Paulus, P., Ruppert, Y., Vielhaber, M., Griebsch, J.
Process Map Definition for Laser Metal Deposition of VDM Alloy 780 on the 316L Substrate
in: Journal of Manufacturing and Materials Processing MDPI, 2023, 7(3), 86 >>>Link

Paulus, P., Ruppert, Y., Vielhaber, M., Griebsch, J.
Powder-based laser metal deposition of VDM Alloy 780: strategy development for efficient buildup of thin-walled components
in: Proceedings Volume 12414, High-Power Laser Materials Processing: Applications, Diagnostics, and Systems XII; 1241408 (2023), Event: SPIE LASE 2023, San Francisco, California, USA  >>>Link

2022

König, K., Reis, M., Vielhaber, M., Jung, A.
Application of Ultraviolet (UV) Radiation and Fluorescence for DIC Measurements – Quality Improvement
in: Optics and Lasers in Engineering, Volume 158, November 2022, 107140 >>>Link

Schweitzer, G. M., Mörsdorf, S., Bitzer, M., Vielhaber, M.
Detection of Cause-Effect Relationships in Life Cycle Sustainability Assessment Based on an Engineering Graph
in: 17th International Design Conference, May, 23-26, 2022, Croatia (Online), Seiten 1129-1137 >>>Link

Mörsdorf, S., Neumann, D., Mohnke, J., Vielhaber, M.
Beyond Sustainable Products – Concept for a Positive Impact Product Engineering (PIPE)
in: 29th CIRP Conference on Life Cycle Engineering, April 4-6, 2022, Leuven, Belgium, Procedia CIRP, Vol. 105, 2022, Seiten 19-24 >>>Link

Kaspar, J., König, K., Scholz, J., Quirin, S., Kleiner, S. Fleischer, J. Herrmann, H.-G., Vielhaber, M.
SyProLei – A systematic product development process to exploit lightweight potentials while considering costs and CO2 emissions
in: 32nd CIRP Design Conference (CIRP Design 2022) - Design in a changing world, Procedia CIRP, Vol. 109, 2022, Seiten 520-525 >>>Link

2021

Scholz, J., Kaspar, J., Quirin, S., Kneidl, B., Kleiner, S., Friedmann, M., Fleischer, J., Herrmann, H.-G., Vielhaber, M.
Konzept eines systemischen Entwicklungsprozesses zur Hebung von Leichtbaupotenzialen
in: Zeitschrift für wirtschaftlichen Fabrikbetrieb, Band 116, Heft 11, 2021, S. 797-800 >>>Link

Scholz, J., Kaspar, J., Quirin, S., Ruhland, P., Coutandin, S., Fleischer, J., Vielhaber, M., Herrmann, H.-G.
Leichtbau ganzheitlich denken
in: VDI-Z, Volume 163, Nr. 7-8, 2021, S. 70-71 >>>Link

Stoffels, P., Kaspar, J., Vielhaber, M.
Product vs. Production Development II – Integrated Product, Production, Material and Joint Definition
in: Proceedings of the Design Society, 23rd International Conference on Engineering Design (ICED 2021), 16.-20.08.2021, Göteborg, Schweden, Vol. 1, 2021, S. 2471-2480 >>>Link

Schweitzer, G. M., Bitzer, M., Vielhaber, M.
Artificial Intelligence in Engineering: Evolution of Virtual Product Development in the context of Medical Device Industry
in: 31st CIRP Design Conference 2021 (CIRP Design 2021), 19.-21.05.2021, Enschede, The Netherlands 349-354 >>>Link

Kaspar, J., Mohnke, J., Vielhaber, M.
GreenTrail – A Sustainable Mobility Concept Advisor (SMCA) Tool
in: 28th CIRP Life Cycle Engineering (LCE) Conference, 10.-12.03.2021, Jaipur, Indien, Procedia CIRP, Vol. 98, 2021, S. 648-653 >>>Link

Illmer, B., Vielhaber, M.
Describing cyber-physical systems using production characteristics and methodical integration into virtual commissioning
in: 8th CIRP Conference on Assembly Technology and Systems (CIRP-CATS), 29.09.-01.10.2020, Athen, Greece, Procedia CIRP, Vol. 97, 2021, S. 272-277 >>>Link

2020

Schweitzer, G. M.; Bitzer, M., Vielhaber, M.
Produktentwicklung: KI-ready? Evolutionsschritte der Produktentwicklung am Beispiel der Medizintechnik
in: Zeitschrift für wirtschaftlichen Fabrikbetrieb, Band 115, Heft 12, 2020, S. 873-876

Duschek, D., Vielhaber, M.
Modelling and designing of the system properties based on characteristics and the degree of maturity on the example of a high pressure storage system
in: Proceedings of Nord Design 2020, August 12-14, 2020, Lyngby, Denmark >>>Link

Schneberger, J.-H., Kaspar, J., Vielhaber M.
Post-Processing and Testing-Oriented Design for Additive Manufacturing – A General Framework for the Development of Hybrid AM Parts
in: 27th CIRP Life Cycle Engineering (LCE) Conference, 13.-15.05.2020, Grenoble, Procedia CIRP, Vol. 90, 2020, S. 91-96 >>>Link

Richter, R., Kamal, M.A.M., García-Rivera, M.A., Kaspar, J., Junk, M., Elgaher, W.A.M., Srikakulam, S.K., Gress, A., Beckmann, A., Grißmer, A., Meier, C., Vielhaber, M., Kalinina, O., Hirsch, A.K.H., Hartmann, R.W., Brönstrup, M., Schneider-Daum, N., Lehr, C.-M.
A hydrogel-based in vitro assay for the fast prediction of antibiotic accumulation in Gram-negative bacteria
in: Materials Today Bio, Vol. 8, 2020. S. 1000841.1-1000841.15 >>>Link

Illmer, B., Vielhaber, M.
Cyber-physical systems and production characteristics – classification and visualization of relationships
in: 53rd CIRP Conference on Manufacturing Systems (CIRP-CMS), 01.-03.07.2020, Chicago, IL, USA, Procedia CIRP, Vol. 93, 2020, S. 186-191 >>>Link

Illmer, B., Karkowski, M., Vielhaber, M.
Petri net controlled virtual commissioning – A virtual Design-loop approach
i
n: 30th CIRP Design Conference. Enhancing design though the 4th industrial revolution thinking, 05.-08.05.2020, Kruger National Park, South Africa, Procedia CIRP, Vol. 91, 2020, S. 152-157 >>>Link

Kaspar, J., Choudry, S.A., Vielhaber, M.
Systemic Assessment and Selection of Material and Joining Technology Exemplarily Applied on the Automotive Bodywork
in: 30th CIRP Design Conference. Enhancing design though the 4th industrial revolution thinking, 05.-08.05.2020, Kruger National Park, South Africa, Procedia CIRP, Vol. 91, 2020, S. 201-206 >>>Link

Kaspar, J., Schneberger, J.-H., Vielhaber, M.
LEAN Mobility – The spirit of a future Lightweight, Efficient, Application-oriented and Need-adapted road mobility concept
in: 17th Global Conference on Sustainable Manufacturing (GCSM), 09.-11.10.2019, Shanghai, China, Procedia Manufacturing, Vol. 43, 2020, S. 64-71 >>>Link

2019

Kaspar, J., Vielhaber, M.
Cooperative and application-oriented learning in engineering design – systems design methodology educated on solutions for mousetrap-powered vehicles
in: 21st International Conference on Engineering and Product Design Education, 11.-13.09.2019, Glasgow, UK, DS 95: Proceedings of the 21th International Conference on Engineering and Product Design Education (E&PDE 2019), 2019, Paper 22_1101 >>>Link

Schneberger, J.-H., Häfele, T., Kaspar, J., Vielhaber, M.
Hybrid Additive Manufacturing - Requirements Engineering Framework for Process Chain Considerations
in: Proceedings of the 22nd International Conference on Engineering Design (ICED19), 05.-08.08.2019, Delft, Niederlande, DS 94, Vol. 1(1), 2019, S. 3651-3660 >>>Link

Revfi, S., Kaspar, J., Vielhaber, M., Albers, A.
Function-based Material Selection for Cross-component Lightweight Design within the Extended Target Weighing Approach
in: Proceedings of the 22nd International Conference on Engineering Design (ICED19), 05.-08.08.2019, Delft, Niederlande, DS 94, Vol. 1(1), 2019, S. 2715-2724 >>>Link

Schneberger, J.-H., Kaspar, J., Vielhaber, M.
Integrated and Customer-Oriented Material and Process Selection by Sensory Multi-Criteria Decision-Making
in: Proceedings of the 22nd International Conference on Engineering Design (ICED19), 05.-08.08.2019, Delft, Niederlande, DS 94, Vol. 1(1), 2019, S. 1175-1184 >>>Link

Reichwein, J., Kaspar, J., Vielhaber, M., Kirchner, E.
Exploitation of AM-potentials by linking manufacturing processes to function-driven product design
in: Proceedings of the 22nd International Conference on Engineering Design (ICED19), 05.-08.08.2019, Delft, Niederlande, DS 94, Vol. 1(1), 2019, S. 739-748 >>>Link

Kaspar, J., Revfi, S., Albers, A., Vielhaber, M.
Cross-Component Material and Joining Selection for Functional Lightweight Design based on the Extended Target Weighing Approach – A Detailed Application Example
in: 29th CIRP Design Conference, 08.-10.05.2019, Póvoa de Varzim, Portugal, Procedia CIRP, Vol. 84, 2019, S. 694-700 >>>Link

Illmer, B., Vielhaber, M.
Synchronizing Digital Process Twins between virtual products and resources – A virtual design method
in: 29th CIRP Design Conference, 08.-10.5.2019, Póvoa de Varzim, Portugal, Procedia CIRP, Vol. 84, 2019, S. 532-537 >>>Link

Kaspar, J., Reichwein, J., Kirchner, E., Vielhaber, M.
Integrated Design Pattern Matrix for Additive Manufacturing – A Holistic Potential Analysis for Systemic Product and Production Engineering
in: 29th CIRP Design Conference, 08.-10.05.2019, Póvoa de Varzim, Portugal, Procedia CIRP, Vol. 84, 2019, S. 480-485 >>>Link

Häfele, T., Schneberger, J.-H., Kaspar, J., Vielhaber, M., Griebsch, J.
Hybrid Additive Manufacturing – Process Chain Correlations and Impacts
in: 29th CIRP Design Conference, 08.-10.05.2019, Póvoa de Varzim, Portugal, Procedia CIRP, Vol. 84, 2019, S. 328-334 >>>Link

Choudry, S.A., Kaspar, J., Greinacher, F., Landgrebe, D.
A Prediction-Model for an Improved Decision-making of Joining Technologies in the Early Stage of Automobile Body Development
in: 26th CIRP Conference on Life Cycle Engineering, 07.-09.05.2019, West Lafayette (IN), USA, Procedia CIRP, Vol. 80, 2019, S. 10-14 >>>Link

Kaspar, J., Choudry, S.A., Vielhaber, M.
Optimized Decision-Making in Joining Selection by Alternative-Based Material and Design-Oriented Changes
in: 26th CIRP Conference on Life Cycle Engineering, 07.-09.05.2019, West Lafayette (IN), USA, Procedia CIRP, Vol. 80, 2019, S. 4-9 >>>Link

Kaspar, J., Vielhaber, M.
Systematische Auslegung hybrider Leichtbaustrukturen – technische, wirtschaftliche und ökologische Konzepte und Perspektiven
in: 9. Landshuter Leichtbau-Colloquium (LLC). Leichtbau in Forschung und industrieller Anwendung von der Nano- bis zur Makroebene, 27.-28.02.2019, Landshut 2019, S. 161-168

Kaspar, J., Bechtel, S., Häfele, T., Herter, F., Schneberger, J., Bähre, D., Griebsch, J., Herrmann, H.-G., Vielhaber, M.
Integrated Additive Product Development for Multi-Material Parts
in: 16th Global Conference on Sustainable Manufacturing (GCSM), October 2-4, 2018, Lexington (KY), USA, Procedia Manufacturing, Vol. 33, 2019, S. 3-10 >>>Link

2018

Choudry, S. A., Kaspar, J., Vielhaber, M., Landgrebe, D.
Concurrent Assessment of Material and Joining Technology in Lightweight Engineering
in: Dao, D., Howlett, R. J., Setchi, R., Vlacic, L. (Hrsg.), Sustainable Design and Manufacturing 2018. KES-SDM 2018. Smart Innovation, Systems and Technologies, Vol. 130, Springer, Cham, 2019, S. 148-158 >>>Link

Kaspar, J., Kuhn, P., Vielhaber, M.
Systemeffizienter Hybridleichtbau – Ein technischer, wirtschaftlicher und ökologischer Potenzialvergleich im Anwendungsfeld Karosseriebau
in: Brökel, K., Corves, B., Grote, K.-H., Lohrengel, A., Müller, N., Nagarajah, A., Rieg, F., Scharr, G., Stelzer, R. (Hrsg.), 16. Gemeinsames Kolloquium Konstruktionstechnik 2018 – Digitalisierung und Produktentwicklung. Vernetzte Entwicklungsumgebungen 11.-12.10.2018, Bayreuth, Universität Bayreuth 2018, S. 144-155

Luedeke, T. F., Köhler, C., Conrad, J., Grashiller, M., Sailer, A., Vielhaber, M.
CPM/PDD in the context of Design Thinking and Agile Development of Cyber-Physical Systems: Use Cases and Methodology
Nord Design 2018, August 14-17, 2018, Linköping, Sweden >>>Link

Duschek, D., Vielhaber, M.
Simulation of the system properties of a high-pressure storage depending on the degree of product maturity
Nord Design 2018, August 14-17, 2018,Linköping, Sweden >>>Link

Kaspar, J., Vielhaber, M.
Hybrid Lightweight Design for Structural Components – A Technical, Economic, and Ecological Potential Analysis
in: Symposium Lightweight Design in Product Development 2018, 14.-15.06.2018, Zürich, Schweiz, LWD-PD18, 2018, S. 8-10 >>>Link

Schneberger, J.-H., Luedeke, T., Vielhaber, M.
Agile Transformation and Correlation of Customer-Specific  Requirements and System-Inherent Characteristics –
An Automotive Example

in: 28th CIRP Design Conference, 23.-25.05.2018, Nantes, Frankreich, Procedia CIRP, Vol. 70, 2018, S. 78-83 >>>Link

Kaspar, J., Stoffels, P., Schneberger, J.-H., Vielhaber, M.
Integrated Product, Production and Material Definition for Conventional versus Generative Manufacturing Technologies
in: 28th CIRP Design Conference, 23.-25.05.2018, Nantes, Frankreich, Procedia CIRP, Vol. 70, 2018, S. 180-185 >>>Link

Choudry, S. A., Kaspar, J., Alber, U., Landgrebe, D.
Integration of an Assessment Methodology for the Selection of Joining Technologies in Lightweight Engineering
in: 28th CIRP Design Conference, 23.-25.05.2018, Nantes, Frankreich, Procedia CIRP, Vol. 70, 2018, S. 217-222 >>>Link

Kaspar, J., Vielhaber, M.
Integrated Cross-Component Lightweight and Material-Oriented Development Methodology – The Embodiment Design Cycle
in: 28th CIRP Design Conference, 23.-25.05.2018, Nantes, Frankreich, Procedia CIRP, Vol. 70, 2018, S. 481-486 >>>Link

Kaspar, J., Stoffels, P., Schneberger, J.-H., Vielhaber, M.
Early Phase Evaluation of Additive Manufacturing Technologies within an Integrated Product and Production Engineering Approach
in: 15th International Design Conference – Design 2018, 21.-24-05.2018, Dubrovnik, Kroatien, DS92_467, Vol. 3, 2018, S. 1185-1196 >>>Link

Luedeke, T. F., Köhler, C., Conrad, J., Grashiller, M., Ruf, T., Sailer, A., Vielhaber, M.
CPM/PDD as Integrated Product and Process Model für  a Design-Thinking based, agile Product Development Process
i
n: 15th International Design Conference – Design 2018, 21.-24-05.2018, Dubrovnik, Kroatien, DS92_311, Vol. 5, 2018, S. 2063-2074 >>>Link

Kaspar, J., Choudry, S. A., Vielhaber, M.,
Concurrent Selection of Material and Joining Technology – Holistically Relevant Aspects and Its Mutual Interrelations in Lightweight Engineering
in: 51st CIRP Conference on Manufacturing Systems, 16.-18.05.2018, Stockholm, Schweden, Procedia CIRP 72, 2018, S. 780-785 >>>Link

Illmer, B., Vielhaber
Virtual Validation of Decentrally Controlled Manufacturing Systems with Cyber-Physical Functionalities
in: 51st CIRP Conference on Manufacturing Systems (CIRP-CMS), 16.-18.5.2018, Stockholm, Schweden, Procedia CIRP 72, 2018, S. 509-514 >>>Link

Neckenich, J., Tharma, R., Winter, R., Vielhaber, M.
3D-Master-Leitungssatz – Virtuelle Produktentwicklung von Automobilleitungssätzen. 3D-Master Wiring Harness –
Virtual Product Design of Automotive Wiring Harness as Combination of Installation Space- and Product Orientation

in: Konstruktion. Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, 05/2018, S. 71-75

Kaspar, J., Choudry, S. A., Landgrebe, D., Vielhaber, M.
Concurrent and Geometry-Dependent Selection of Material and Joining Technology –
An Initial Utility-Based Systematic Decision-Making Tool

in: The 12th Annual IEEE International Systems Conference, 23.-26.04.2018, Vancouver, Kanada, 2018 Annual IEEE International Systems Conference (SysCon), 2018, S. 767-774 >>>Link

Kaspar, J., Luedeke, T.F., Meiser, P., Vielhaber, M.
Sustainable Aspects Regarding a Multi-Criteria & Cross-Component Prediction of Property Change Potentials Within the Pre-Development Phase of Technical Product Systems
in: 15th Global Conference on Sustainable Manufacturing (GCSM), 25.-27.09.2017, Haifa, Israel, Procedia Manufacturing, Vol. 21, 2018, S. 725-732 >>>Link

Stoffels, P., Kaspar, J., Bähre, D., Vielhaber, M.
Integrated Product and Production Engineering Approach – A Tool-Based Method for a Holistic Sustainable Design, Process and Material Selection
in: 15th Global Conference on Sustainable Manufacturing (GCSM), 25.-27.09.2017, Haifa, Israel, Procedia Manufacturing, Vol. 21, 2018, S. 790-797 >>>Link

2017

Vielhaber, M., Kaspar, J., Stoffels, P.
Engineering For Sustainable Road Mobility
in: 14th Global Conference on Sustainable Manufacturing (GCSM), 03.-05.10.2016, Stellenbosch, Südafrika, Procedia Manufacturing, Vol. 8, 2017, S. 246-253 >>>Link

Stoffels, P., Kaspar, J., Bähre, D., Vielhaber, M.
Holistic Material Selection Approach for more Sustainable Products
in: 14th Global Conference on Sustainable Manufacturing (GCSM), 03.-05.10.2016, Stellenbosch, Südafrika, Procedia Manufacturing, Vol. 8, 2017, S. 401-408 >>>Link

Kaspar, J., Vielhaber, M.
Sustainable Lightweight Design – Relevance and Impact on the Product Development and Lifecycle Process
in: 14th Global Conference on Sustainable Manufacturing (GCSM), 03.-05.10.2016, Stellenbosch, Südafrika, Procedia Manufacturing, Vol. 8, 2017, S. 409-416 >>>Link

Kaspar, J., Vielhaber, M.
Additiver Hybridleichtbau – Grenzenloser Systemleichtbau zukünftiger Produktentwicklungen
in: Huber, O., Bicker, M., Patzelt, P. (Hrsg.), 8. Landshuter Leichtbau-Colloquium. Leichtbau grenzenlos, 08.-09.03.2017, Landshut 2017, S. 209-219

Kaspar, J., Häfele, T., Kaldenhoff, C., Griebsch, J., Vielhaber, M.
Hybrid Additive Design of FRP Components – Fiber-Reinforced Sandwich Structures Based on Selective Laser Sintering
in: 27th CIRP Design Conference, 10.-12.05.2017, Cranfield, UK, Procedia CIRP, Vol. 60, 2017, S. 235-240 >>>Link

Schlag, A., Bär, T., Vielhaber, M.
Generische Anforderungserstellung für automatisierte Fertigungs- und Montageanlagen mittels formalisierter Prozessbeschreibung
für einen höheren Reifegrad im Anlagenentwicklungsprozess

in: Automation 2017. 18. Leitkongress der Mess- und Automatisierungstechnik: Technology Networks Processes, 27.-28.06.2017, Baden-Baden,
VDI-Berichte 2293, Seite 138-151

Häfele, T., Kaspar, J., Vielhaber, M., Calles, W., Griebsch, J.
Fiber-Reinforced Sandwich Structures Based on Selective Laser Sintering: A Technological View
in:19th International Conference on Innovative Design and Manufacturing (ICIDM 2017), 22.-23.07.2017, Porto, Portugal, International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, Vol. 11 (7), 2017, S. 1322 -1328 >>>Link

Kaspar, J., Vielhaber, M.
Fiber-Reinforced Composite Design Within a Lightweight and Material-Oriented Development Process
in: DS 87-1 Proceedings of the 21th International Conference on Engineering Design (ICED 17), 21.-25.08.2017, Vancouver, Canada, Resource Sensitive Design, Design Research Applications and Case Studies, Vol. 1, 2017, S. 329-338 >>>Link

Stäbler, M., Weber, J., Paetzold, K., Vielhaber, M.
Holistic Approach for Design and Re-Design of Production Units
in: DS 87-1 Proceedings of the 21th International Conference on Engineering Design (ICED 17), 21.-25.08.2017, Vancouver, Canada, Resource Sensitive Design, Design Research Applications and Case Studies, Vol. 1, 2017, S. 419-428 >>>Link

Grashiller,M., Luedeke, T., Vielhaber M.
Integrated Approach to the agile Development with Design Thinking in an Industrial Environment
in: DS 87-2 Proceedings of the 21th International Conference on Engineering Design (ICED 17), 21.-25.08.2017, Vancouver, Canada, Design Processes. Design Organisation and Management, Vol. 2, 2017, S. 239-248 >>>Link

Luedeke, T. F., Kaspar, J., Meiser, P., Schneberger, J.-H., Herrmann, H.-G., Vielhaber, M.
Matrix-Based System Modelling to Predict Properties Change Propagation
in: DS 87-4 Proceedings of the 21th International Conference on Engineering Design (ICED 17), 21.-25.08.2017, Vancouver, Canada, Design Methods and Tools, Vol. 4, 2017, S. 229-238 >>>Link

Illmer, B., Kaspar, J., Vielhaber, M.
Cyber-Physical Effects on the Virtual Commissioning Architecture
in: DS 87-5 Proceedings of the 21th International Conference on Engineering Design (ICED 17), 21.-25.08.2017, Vancouver, Canada, Design for X, Design to X, Vol. 5, 2017, S. 169-178 >>>Link

Kaspar, J., Luedeke, T., Vielhaber, M.
Matrixbasierte Beschreibung von Eigenschaftsänderungen – Ein multikriterieller Ansatz
in: Krause, D., Paetzold, K., Wartzack, S. (Hrsg.), Design for X – Beiträge zum 28. DfX-Symposium Oktober 2017, 04.-05.10.2017, Bamberg, TUTECH Verlag Hamburg, 2017, S. 111-124

Kaspar, J., Kaiser, R., Vielhaber, M.
Bauteilübergreifende systematische Werkstoffauswahl leichtbaugetriebener Fahrzeugstrukturen – Ein ganzheitlicher Ansatz
in: Brökel, K., Grote, K.-H., Stelzer, R., Rieg, F., Feldhusen, J., Müller, N., Köhler, P. (Hrsg.), 15. Gemeinsames Kolloquium Konstruktionstechnik 2017 – Interdisziplinäre Produktentwicklung, 05.-06.10.2017, Duisburg, Universität Duisburg-Essen 2017, S. 369-378 >>>Link

Illmer, B.; Vielhaber, M.
Auswirkungen hochvernetzter Systeme auf die Modellarchitektur der virtuellen Inbetriebnahme
in: Brökel, K., Grote, K.-H., Stelzer, R., Rieg, F., Feldhusen, J., Müller, N., Köhler, P. (Hrsg.), 15. Gemeinsames Kolloquium Konstruktionstechnik 2017 – Interdisziplinäre Produktentwicklung 05.-06.10.2017, Duisburg, Universität Duisburg-Essen 2017, S. 297-306

Schlag, A.; Vielhaber, M.
Auto-Generated Specification of Assembly Units by Formalized Requirements for a higher Maturity in the Engineering Process
in: The 20th World Congress of the International Federation of Automatic Control. IFAC 2017 World Congress, Toulouse, France, 9-14 July 2017, IFAC PapersOnLine 50-1, S. 7584-7591

Damrath, F., Strahilov, A., Bär, T., Vielhaber, M.
Physics-Based Simulation for Energy Consumption Optimization of Automated Assembly Systems in the Automotive Industry
in: Ghezzi, L., Hömberg, D., Landry, C. (Hrsg.), Math for the Digital Factory,  Cham, Springer 2017, S. 117-134

Dorsch, T., Tschirner, C., Zuccaro, C., Vielhaber, M. et al.,
Systems Engineering. {Die Klammer in der technischen Entwicklung}
Rambo, J., Weber, H. (Hrsg.), Gesellschaft für Systems Engineering e.V., Norderstedt, GfSE-Verlag 2017

Duschek, D., Luedeke, T. F., Vielhaber, M.
Approach to an Agile Development of a Sustainable, Consumer-specific Mobility Concept
in: EVS30 – International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium, 09.-11.10.2017, Stuttgart, 6/059

Thiel, I., Vielhaber, M.
Virtuelle Inbetriebnahme zur Absicherung flexibler Produktionssysteme.
Virtual Start-up for Fexible Manufacturing Control Systems

in: Wenzel, S., Peter, T. (Hrsg.), Simulation in Produktion und Logistik 2017, Kassel, Kassel University Press 2017, S. 177-184

2016

Stoffels, P., Vielhaber, M.
Decision support for energy efficient production in Product and Production Development
in: 13th Global Conference on Sustainable Manufacturing – Decoupling Growth from Resource Use, 16.-18.09.2015, Ho Chi Minh City, Vietnam, Procedia CIRP, Vol. 40, 2016, S. 530-535 >>> Link

Bähre, D., Swat, M., Trapp, K., Vielhaber, M.
Supporting manufacturing technology definition through multi-level resource consumption analysis
in: 13th Global Conference on Sustainable Manufacturing – Decoupling Growth from Resource Use, 16.-18.09.2015, Ho Chi Minh City, Vietnam, Procedia CIRP, Vol. 40, 2016, S. 378-383 >>> Link

Litwa, F., Gottwald, M., Spudeiko, S., Paetzold, K., Vielhaber, M.
Optimization coupling approach for/with non-static point based CAT-models
in: 14th CIRP Conference on Computer Aided Tolerancing (CAT), 18.-20.05.2016, Göteburg,S. 166-171 >>> Link

Neckenich, J., Zielbauer, U., Winter, R., Vielhaber, M.
An Integrated Approach for an Extended Assembly-oriented Design of Automotive Wiring Harness using 3D Master Models
in: Proceedings of the 14th International Design Conference (DESIGN16), Vol. 2: Design Support Tools, Dubrovnik, Croatia, 16.-19.05.2016, S.717-726

Kaiser R., Wicht D., Vielhaber, M.
Integration of a systematic material selection into the dynamic development process of vehicle structure parts
in: Proceedings of the 14th International Design Conference (DESIGN 2016), Dubrovnik, Croatia, 16.-19.05.2016, S. 261-270

Häfele, T., Calles, W., Griebsch, J., Kaldenhoff, C., Kaspar, J., Vielhaber, M.
Hybride CFK-Bauteile auf Basis der Laser-Sinter-Technologie
in: 3. Technologietag Hybrider Leichtbau, 07.06.2016, Stuttgart

Kaspar, J., Bähre, D., Vielhaber, M.
Material Selection Based on a Product and Production Engineering Integration Framework
in: 26th CIRP Design Conference – Creative Design Products and Production Systems, 15.-17.06.2016, Stockholm, Schweden, Procedia CIRP,  Vol. 50, 2016, S. 2-7 >>> Link

Kaspar, J., Vielhaber, M.
Cross-Component Systematic Approach for Lightweight and Material-Oriented Design
in: 11th NordDesign 2016, 10.-12.08.2016, Trondheim, Norwegen, Proceedings of DS 85-1, Product Architectures & Modularity, Vol. 1, S. 332-341 >>> Link

Bitzer, M., Vielhaber, M., Kaspar, J.
Product Lifecycle Management - How to adapt PLM to support changing product development processes in industry?
in: 11th NordDesign 2016, 10.-12.08.2016, Trondheim, Norwegen, Proceedings of DS 85-1, Product Architectures & Modularity, Vol. 1, S. 360-369 >>> Link

Stoffels,P., Veilhaber, M.
Integrated Development Process of Products and Production Systems
in: 11th NordDesign 2016, 10.-12.08.2016, Trondheim, Norwegen, Vol. 1., S. 370-380 >>>Link

Kaiser, R., Vielhaber, M.
Systematische Materialauswahl von Fahrzeugstrukturbauteilen
in: 14. Gemeinsames Kolloquium Konstruktionstechnik 2016, 06.-07.10.2016, Rostock, S. 165-176

Kaspar, J., Vielhaber, M.
Komponentenübergreifende leichtbau- und werkstofforientierte Produktentwicklungsmethodik infolge anforderungsoptimierter
Multi-Material-Strukturen

in: Bröckel, K., Rieg F. Stelzer, R. et al. (Hrsg.), 14. Gemeinsames Kolloquium Konstruktionstechnik 2016, Traditio et Innovatio / Entwicklung und Konstruktion, 06.-07.10.2016, Rostock, Shaker-Verlag Aachen 2016, S. 177-184 >>> Link

Schlag, A., Süß, S., Bär, T., Vielhaber, M.
Ganzheitliche Projektierung automatisierter Montageanlagen als Grundlage von digitalen Absicherungsprozessen
in: Automation 2016. 17. Branchentreff der Mess- und Automatisierungstechnik: secure & reliable in the digital world, 07.-08.06.2016, Baden-Baden, VDI-Berichte 2284, Paper ID 1011_87_2284_Suess

2015

Litwa, F., Gottwald, M., Gascó, V., Vielhaber, M.
Sensitivity analysis of several body-in-white single part and assembly parameters using tolerance analysis
in: 12th Weimar Optimization and Stochastic Days 2015, 04.-06.11.2015, Weimar,
http://www.dynardo.de/fileadmin/Material_Dynardo/bibliothek/WOST12/18_WOST2015_Session5_Litwa.pdf

Litwa, F., Gottwald, M., Forstmeier J., Vielhaber, M.
Determination of Functional Intersections between Multiple Tolerance-Chains by the Use of the Assembly-Graph
in: NAFEMS  World Congress 2015. A World of Simulation, 21.-24.06.2015, San Diego, Ca., Paper ID 132, S. 189-203

Damrath, F., Strahilov, A., Bär, T., Vielhaber, M.
Experimental Validation of a Physics-based Simulation Approach for Pneumatic Components for Production Systems in the Automotive Industry
in:15th CIRP Conference on Modelling of Machining Operations, 11.-12.06.2015, Karlsruhe, S. 35-40

Damrath, F., Strahilov, A., Bär, T., Vielhaber, M.
A Method for Energy-efficient Assembly System Design within Physics-based Virtual Engineering in the Automotive Industry
in: CIRP CMS 2015 – 48th CIRP Conference on Manufacturing Systems. Research and Innovation in Manufacturing: Key Enabling Technologies for the Factories of the Future, 24.-26.06.2015, Ischia, Italy, Paper ID PROCIR-D-14-01246R2

Vielhaber, M., Stommel, M., Gessat, J., Haupenthal, J., Thomas, M.
Werkstoffverbunde in hochbelasteten Komponenten der Fluid-Mechatronik
in: Müller, R.; Flackus, J. (Hrsg.), Produktivität, Qualität, Effizienz. Innovative Prozesse für die Produktion von morgen. Shaker Verlag Aachen 2015, S. 180-208

Vielhaber, M., Stoffels, P.
Virtuelles Anlagen-Engineering – Methoden und CAx-Umsetzung von der Anlagenkonstruktion bis zur Virtuellen Inbetriebnahme
in: Müller, R.; Flackus, J. (Hrsg.), Produktivität, Qualität, Effizienz. Innovative Prozesse für die Produktion von morgen. Shaker Verlag Aachen 2015, S. 350-367

Stoffels, P., Vielhaber, M.
Methodical Support for Concurrent Engineering across Product and Production (System) Development
in: Proceedings of the 20th International Conference on Engineering Design (ICED15), Vol. 4: Design Information and Knowledge Management,  27.-30.07.2015, Milan, Italy, S. 155-162

Stoffels, P., Vielhaber, M.
Energy Efficiency oriented Development of Production Systems
in: Proceedings of the 20th International Conference on Engineering Design (ICED15), Vol. 4: Design Information and Knowledge Management,  27.-30.07.2015, Milan, Italy, S. 323-332.

Litwa, F., Gottwald, M., Vielhaber, M.
Integrated approach for efficient tolerence optimization on sheet metal parts
in: Proceedings of the 20th International Conference on Engineering Design (ICED15), Vol. 6: Design Information and Knowledge Management,  27.-30.07.2015, Milan, Italy, S. 41-51

Neckenich, J., Winter, R., Vielhaber, M.
Digital Support of Wiring Harness Development (based on the 3D Master Method)
in: Proceedings of the 20th International Conference on Engineering Design (ICED15), Vol. 10: Design Information and Knowledge Management, 27.-30.07.2015, Milan, Italy, S.1-10

Kaiser R., Martini T., Vielhaber, M.
Einfluss der Fügetechnik auf die Materialauswahl von Strukturbauteilkonzepten mit baureihenübergreifend einheitlichen Schnittstellen
in: 13. Gemeinsames Kolloquium Konstruktionstechnik 2015, 08.-09.10.2015, Clausthal, S. 249-256

2014

Dohr, F.
Methodik für die simulationsbasierte Entwicklung mechatronischer Systeme
Dissertation, 2014, Saarbrücken

Stoffels, P., Bähre, D., Frey, G., Vielhaber M.
Energy Efficiency Engineering – Towards an Integrated Method Framework for Energy-oriented Product and Production Development
in: 2nd ENEFM, International Congress on Energy Efficiency and Energy Related Materials, 16.-19.10.2014, Oludeniz, Turkey, Paper ID 219

Damrath, F., Strahilov, A., Bär, T.,Vielhaber, M.
Establishing Energy Efficiency as Criterion for Virtual Commissioning of Automated Assembly Systems
in: Konferenz-Einzelbericht: 5thCATS 2014 – CIRP Conference on Assembly Technologies and Systems, 13.-14.11.2014, Dresden, S. 137-142


Luedeke, T., Vielhaber, M.
Ganzheitliche Integration von „Design for X“-Kriterien in den mechatronischen Produktentwicklungsprozess am Beispiel der Gewichtsoptimierung
in: Konferenz-Einzelbericht: 12. Gemeinsames Kolloquium Konstruktionstechnik 2014, 16.-17.10.2014, Bayreuth, S. 471-480


Luedeke, T., Bonertz, R., Vielhaber, M.
Gewichtsoptimierung in den frühen Phasen der Entwicklung – Anforderungen, Funktionen, Wirkprinzipien
in: Konferenz-Einzelbericht: 12. Gemeinsames Kolloquium Konstruktionstechnik 2014, 16.-17.10.2014, Bayreuth, S. 407-416


Litwa, F., Gottwald, M., Bohn, M., Klinger, J. F., Walter, M., Wartzack, S., Vielhaber, M.
Automated point-based tolerance analysis model creation for sheet metal parts
in: Konferenz-Einzelbereicht: 13th CIRP Conference on Computer Aided Tolerancing (CAT 2014), 11.05.-14.05.2014, Hangzhou, China,
S. CAT_024, Procedia CIRP, Vol. 27, 2015, S. 65-70

Litwa, F., Gerlach, C., Gottwald, M., Bohn, M., Kraß, B., Vielhaber, M.
Approach forstandardized database regarding tolerance analysis in automotive industry
in: Konferenz-Einzelbericht: 10th NordDesign 2014, 27.08.-29.08.2014, Espoo, Finnland; S. 785-794

Dohr, F., Vielhaber, M.
Using system-level simulation in early mechatronic design stages
in: Konferenz-Einzelbericht: 10th NordDesign 2014, 27.08.-29.08.2014, Espoo, Finnland; S. 825-834

Dohr, F., Eisenbart, B.; Huwig, C,. Blessing, L., Vielhaber, M.
Software support for the consistent transition from requirements to functional modeling to system simulation
in: Konferenz-Einzelbericht: 10th NordDesign 2014, 27.08.-29.08.2014, Espoo, Finnland; S. 775-784

Luedeke, T., Bonertz, R., Vielhaber, M.
Weight Optimization Approach for Conceptual Design – Requirements, Functions, Working Principles
in: Konferenz-Einzelbericht: 10th NordDesign 2014, 27.08.-29.08.2014, Espoo, Finnland; S. 805-814

Stoffels, P., Litwa, F., Gerlach, C., Vielhaber, M.
Integration Framework for Product Development and Production Development
in: Konferenz-Einzelbericht: 10th NordDesign 2014, 27.08.-29.08.2014, Espoo, Finnland, S. 744-753

Stoffels, P.;  Vielhaber, M.
EcoDesign for Production Plants
in: Konferenz-Einzelbericht: 24th CIRP Design Conference 2014, 14.04.-16.04.2014, Milano, Paper ID PROCIR-D-13-00204

Vielhaber, M.; Stoffels, P.
Product Development vs. Production Development
in: Konferenz-Einzelbericht: 24th CIRP Design Conference 2014, 14.04.-16.04.2014, Milano, Paper ID PROCIR-D-13-00192

Lüdeke, T., Vielhaber, M.
Holistic Approach for Secondary Weight Improvements
in: Konferenz-Einzelbericht: 24th CIRP Design Conference 2014, 14.04.-16.04.2014, Milano, Paper ID PROCIR-D-13-00190

Dohr, F., Vielhaber, M.
Formalized description of a framework for simulation-based mechatronic design
in: Konferenz-Einzelbericht: 24th CIRP Design Conference 2014, 14.04.-16.04.2014, Milano, Paper ID PROCIR-D-13-00604

Bitzer, M., Vielhaber, M., Dohr, F.
From Product development to Technology Development
in: Konferenz-Einzelbericht: 24th CIRP Design Conference 2014, 14.04.-16.04.2014, Milano, Paper ID PROCIR-D-13-00189

Dohr, F., Vielhaber, M.
Simulation-Based Concept Generation for Mechatronic Systems
in: Konferenz-Einzelbericht: 13th International Design Conference DESIGN 2014, 19.05.-22.05.2014, Dubrovnik, Kroatien, S. 1271-1282

Luedeke, T., Scheid, S., Vielhaber, M.
Weight Optimization with a Mechatronic Design Catalogue
in: Konferenz-Einzelbericht: 13th International Design Conference DESIGN 2014, 19.05.-22.05.2014, Dubrovnik, Kroatien, S. 1123-1132

Luedeke, T., Meiser, P., Vielhaber, M.
Systematic Determination of Secondary Weight Improvements
in: Konferenz-Einzelbericht: 13th International Design Conference DESIGN 2014, 19.05.-22.05.2014, Dubrovnik, Kroatien, S. 283-292

frühere Veröffentlichungen

Thiel, I., Vielhaber, M., Bär, T.
Geometrischer Abgleich von virtuellem Anlagenmodell und realer Anlage
in: Konferenz-Einzelbericht: Design for X. Beiträge zum 24. DfX-Symposium, 19.-20.09.2013, Hamburg, S. 107-118

Stoffels, P.; Boussahel, W.M.; Vielhaber, M.; Frey, G.
Energy Engineering in the Virtual Factory
in: 18th IEEE International Conference on Emerging Technologies and Factory Automation (EFTA 2013), 10.-13. September 2013, Cagliari, Italy, S.1-6

Stoffels, P.; Boussahel, W.M.; Damrath, F.; Vielhaber, M.; Frey, G.
Energy Engineering in der virtuellen Fabrik
in: Kongress SPS/IPC/Drives 2013, 26.-28. November 2013, Nürnberg, S. 541-549

Dohr, F., Vielhaber, M.
Integrating Formula Student into Design Education – Bridging the Gap between Theory and Practice
in: International Conference on Engineering and Product Design Education, 5.-6. September 2013, Dublin, Paper ID 736, S. 344-349

Eisenbart, B., Dohr, F., Gericke, K., Vielhaber, M., Blessing, L.
Potentials for Realising a Consistent Transition between Functional Modelling with the IFM Framework and Early System Simulation
in: International Conference on Engineering Design, ICED 13, 19.- 22. August 2013, Seoul, Korea, Paper ID 122

Lüdeke, T., Vielhaber, M.
Consideration of Weight Properties during the Design of Weight-optimized Mechatronic Products
in: International Conference on Engineering Design, ICED 13, 19.- 22. August 2013, Seoul, Korea, Paper ID 247

Dohr, F., Vielhaber, M.
Process Model for Simulation-based Mechatronic Design
in: Proceedings of the ASME 2013 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2013, 4.-7. August 2013, Portland, Oregon, DETC2013-13116

Stoffels, P., Dohr, F., Vielhaber, M.
EcoDesign durch frühe mechatronische Systemsimulation von Fahrzeugkonzepten
in: Konferenz-Einzelbericht: Fachtagung Mechatronik 2013, 06.-08.03.2013, Aachen, S. 123-128

Lüdeke, T., Scheid, S. Vielhaber, M.
Mechatronische Konzepte zur Gewichtsreduzierung und -verteilung
in: Konferenz-Einzelbericht: Fachtagung Mechatronik 2013, 06.-08.03.2013, Aachen, S. 129-134

Dohr, F., Stoffels, P., Vielhaber, M.
Early System Simulation to Support EcoDesign of Vehicle Concepts
in: Konferenz-Einzelbericht: Smart Product Engineering. Proceedings of the 23rd CIRP Design Conference, 11.-13.03. 2013, Bochum, S. 999-1008

Bitzer, M., Vielhaber, M.
Technology Framework for Product Design
in: Konferenz-Einzelbericht: Smart Product Engineering. Proceedings of the 23rd CIRP Design Conference, 11.-13.03. 2013, Bochum, S. 663-673

Lüdeke, T., Vielhaber, M.
Early Development of Weight-Optimized Mechatronic
in: Konferenz-Einzelbericht: Smart Product Engineering. Proceedings of the 23rd CIRP Design Conference, 11.-13.03. 2013, Bochum, S. 695-704

Vielhaber, M., Dohr, F.; Lüdeke, T.
School Culture Through Praxis
in: Konferenz-Einzelbericht: International Conference on Engineering and Product Design Education (E&PDE) 2012, 6.-7. September 2012, Antwerpen, Paper ID 5133

Dohr, F., Vielhaber, M.
Enabling simulation-based mechatronic design by shifting of activities
in: Konferenz-Einzelbericht: The ninth Norddesign Conference, 2012, 22.-24. August 2012, Aalborg, Denmark, Paper ID 14

Lüdeke, T., Vielhaber, M.
Towards a Process Model for the Development of Light, Mechatronic Products
in: Konferenz-Einzelbericht: The ninth Norddesign Conference, 2012, 22.-24. August 2012, Aalborg, Denmark, Paper ID 47

Vielhaber, M., Haupenthal, J.
Bringing Knowledge Oriented Engineering to Design Practice
in: Konferenz-Einzelbericht: The ninth Norddesign Conference, 2012, 22.-24. August 2012, Aalborg, Denmark, Paper ID 68

Dohr, F., Vielhaber, M.
Toward simuation-based mechatronic Design
in: Konferenz-Einzelbericht: International Design Conference – Design 2012, 21.-24.05.2012, Dubrovnik, S. 411-420

Lüdeke, T., Vielhaber, M.
Lightweight Mechatronics Design: An integrated Approach
in: Konferenz-Einzelbericht: International Design Conference – Design 2012, 21.-24.05.2012, Dubrovnik, S. 999-1008

Dohr, F., Vielhaber, M.
Modellierung und Simulation im mechatronischen Produktentwicklungsprozess
in: Konferenz-Einzelbericht: Design for X. Beiträge zum 22. DfX-Symposium, Oktober 2011, S. 129-140

Vielhaber, M.
Design to Knowledge – a Root Design Principle
in: Konferenz-Einzelbericht: 56th IWK. International Scientific Colloquium. Ilmenau University of Technology, 12.-16. September 2011, Paper ID 1181

Ćatić, A., Vielhaber, M.
Lean Product Development: Hype or sustainable new Paradigm?
in: Konferenz-Einzelbericht: Proceedings of the 18th International Conference on Engineering Design ICED 11, 15.-18.08.2011, Bd. 1, S. 79-90

Bitzer, M., Vielhaber, M.
Engineering Environment for Product Innovation
in: Konferenz-Einzelbericht: Proceedings of the 18th International Conference on Engineering Design ICED 11, 15.-18.08.2011, Bd. 3, S. 40-51

Bitzer, M. A., Vielhaber, M.
PLM as a Lever for Innovation
in: Konferenz-Einzelbericht: The IFIP WG5. 18th International Conference on Product Lifecycle Management. Eindhoven University of Technology, NL, 11.-13.07.2011, Paper ID 112

Vielhaber, M., Bergsjö, D., Ćatić, A.
Mechatronic Systems Engineering – Theory and Automotive Practice
in: Konferenz-Einzelbericht International Design Conference – DESIGN 2010, Dubrovnik,
17.-20.05.2010, S. 975-984

Bergsjö, D., Bitzer, M., Ćatić, A., Vielhaber, M.
Automotive PLM – Applying product design methodology on the design of PLM solutions
in: Konferenz-Einzelbericht: 2nd Nordic Conference on Product Lifecycle Management – NordPLM ’09, Göteborg, 28.-29.01.2009, S. 21-32

Bitzer, M., Eigner, M., Müller, E., Vielhaber, M.
Determination of PLM Architectures in the Automotive Industry
in: Konferenz-Einzelbericht: 2nd Nordic Conference on Product Lifecycle Management – NordPLM ’09, Göteborg, 28.-29.01.2009, S. 11-20

Bitzer, M., Eigner, M., Hochstein, N. Vielhaber, M.
Produktentwicklungsprozesse und ihre Auswirkungen auf PLM-Architekturen
in: Konferenz-Einzelbericht: Nachhaltige und effiziente Produktentwicklung – 6. Gemeinsames Kolloquium Konstruktionstechnik – KT 2008, Aachen, 09.-10.10.2008, S. 179-189

Vielhaber, M., Bitzer, M., Eigner, M.
Konstruktionsmethodik – und was man für den Entwurf von PLM-Lösungen daraus lernen kann
in: Konferenz-Einzelbericht: Nachhaltige und effiziente Produktentwicklung – 6. Gemeinsames Kolloquium Konstruktionstechnik – KT 2008, Aachen, 09.-10.10.2008, S. 389-399

Bitzer, M., Burr, H., Eigner, M., Vielhaber, M.
Integrated Concepts of Design Education
in: Konferenz-Einzelbericht: International Conference on Engineering and Product Design Education – E&PDE 2008, Barcelona, 04.-05.09.2008, S. 85-90

Bitzer, M., Eigner, M., Vielhaber, M.
Ermittlung von betriebsspezifischen PLM-Lösungen
in: Industrie Management - Zeitschrift für industrielle Geschäftsprozesse, 24 (2008) Nr. 3, S. 27-30

Bitzer, M., Eigner, M., Vielhaber, M.
Impacts of Design Process Characteristics on the Selection of PLM Architectures
in: Konferenz-Einzelbericht International Design Conference – DESIGN 2008, Dubrovnik, 19.-22.05.2008, S. 901-910

Burr, H., Müller, M., Vielhaber, M.
EIMS – A Framework for Engineering Process Analysis
in: Konferenz-Einzelbericht International Conference on Engineering Design – ICED 07, Paris, 28.-31.08.2007, S. 355-356 (Executive Summary), Nr. 428 (Vollversion, CD-ROM)

Bergsjö, D., Vielhaber, M., Malvius, D., Burr, H., Malmqvist, J.
Product Lifecycle Management for Cross-x Engineering Design
in: Konferenz-Einzelbericht International Conference on Engineering Design – ICED 07, Paris, 28.-31.08.2007, S. 469-470 (Executive Summary), Nr. 452 (Vollversion, CD-ROM)

Vielhaber, M., Burr, H., Eigner, M.
Product Structuring for Cross-x PDM
in: Konferenz-Einzelbericht International Design Conference – DESIGN 2006, Dubrovnik, 15.-18.05.2006, S. 655-664

Burr, H., Vielhaber, M., Weber, C.
Information Management for the Digital Factory - Bridging the Gap Between
Engineering Design and Digital Planning

in: Konferenz-Einzelbericht International Design Conference - DESIGN 2006, Dubrovnik, 15.-18.05.2006, S. 463-470

Vielhaber, M.
Assembly-oriented Design – Zusammenbauorientiertes Konstruieren im Produktentstehungsprozess der Automobilindustrie am besonderen Beispiel des Karosserierohbaus
Dissertation, Universität des Saarlandes, Saarbrücken, 2005

Burr, H., Vielhaber, M., Deubel, T., Weber, C., Haasis, S.
CAx/Engineering Data Management Integration - Enabler for Methodical Benefits in the Design Process
in: Journal of Engineering Design, 16 (2005) Nr. 5, S. 1-14

Burr, H., Deubel, T., Vielhaber, M., Weber, C.
Integriertes Produkt- und Prozessdatenmanagement als Basis moderner Engineeringmethoden
in: VDI-Bericht 1819, Konferenz-Einzelbericht Integrierte Informationsverarbeitung in der Produktentwicklung – I²P, Stuttgart, 12.-13.10.2004, S. 245-256

Burr, H., Deubel, T., Weber, C., Vielhaber, M., Haasis, S.
Verwaltung von Engineering-Daten – Herausforderungen und Strategien
in: eDM-Report Nr.2 (2004), S. 18-21

Burr, H., Deubel, T., Weber, C., Vielhaber, M., Haasis, S.
PLM-Herausforderungen und -Strategien in der Automobilindustrie
in: CAD-CAM Report Nr.5 (2004), S. 36-39

Vielhaber, M., Burr, H., Deubel, T., Weber, C., Haasis, S.
Assembly-oriented Design in Automotive Engineering
in: Konferenz-Einzelbericht International Design Conference – DESIGN 2004, Dubrovnik, 18.-21.05.2004, S. 539-546

Burr, H., Vielhaber, M., Deubel, T., Weber, C., Haasis, S.
CAx/EDM-Integration – Enabler for Methodical Benefits in the Design Process
in: Konferenz-Einzelbericht International Design Conference - DESIGN 2004, Dubrovnik, 18.-21.05.2004, S. 833-840

Burr, H., Deubel, T., Vielhaber, M., Haasis, S., Weber, C.
Challenges for CAx and EDM in an International Automotive Company
in: Konferenz-Einzelbericht International Conference on Engineering Design – ICED 03, Stockholm, 19.-21.08.2003, S. 309-310 (Executive Summary), Nr. 1506 (Vollversion, CD-ROM)

Burr, H., Deubel, T., Vielhaber, M., Haasis, S., Weber, C.
IT-Tools for Engineering and Production Planning in an International Automotive Company: Challenges and Concepts
in: Konferenz-Einzelbericht 36th CIRP International Seminar on Manufacturing Systems, Saarbrücken, 03.-05.06.2003, S. 73-80